Perfect-aire PATCH10000 User Manual download pdf (Page 13)

INSTALLATION INSTRUCTIONS (CONTINUED)

Water drainage:

- During dehumidifying modes, remove the drain

plug from the back of the unit and attach 3/4” vinyl

tube included with the unit (5/8” outer diameter).

For the models without drain connector, just

attach the drain hose to the hole. Place the open

end of the hose directly over the drain area in

your basement floor. See Fig. 20 & 21.

- When the water level of the bottom tray reaches

a predetermined level, the unit beeps 8 times and

the digital display area shows "P1". At this time

the air conditioning/dehumidification process will

immediately stop. However, the fan motor will

continue to operate (this is normal).

Carefully move the unit to a drain location,

remove the bottom drain plug and let the

water drain away (Fig. ). Restart the machine

until the "P1" symbol disappears. If the “P1”

symbol will not clear after following the above

instructions and waiting a few minutes after

restarting the machine, call customer service.

Continuous

drain hose

Fig.20

Fig.21

Fig.22

Remove the

drain plug

NOTE: Be sure to reinstall the bottom drain plug

before using the unit.

1 2 ... 8 9 10 11 12 13 14 15 16

No comments

Perfect-aire PATCH10000 User Manual Page 13